17. DT11 System Settings – General
1. Desktop Mode
This setting allows you to enable or disable Desktop Mode. When enabled, the DT11 will automatically enter Desktop Mode when connected to an external power supply.
2. In-Vehicle Mode
When In-Vehicle Mode is enabled and the DT11 is connected to a vehicle's USB port, the device will automatically power on and enter the In-Vehicle Mode playback interface when the vehicle starts.
When the vehicle is turned off, the DT11 will automatically shut down.
3. Double-Tap to Wake
When this function is enabled, you can double-tap the screen to wake up the DT11 while the screen is off.
When the screen saver is active, a single tap is sufficient to wake up the screen.
4. Auto Power On When USB Is Connected
When this function is enabled, the DT11 will automatically power on when a USB cable is connected while the device is powered off.
5. Customizable Button Functions
Two button configurations are available, allowing you to customize the functions of the volume buttons and track selection buttons.
6. HOLD Switch Settings
When the side HOLD switch is activated, any buttons or knobs configured to be disabled under this setting will be locked and cannot be operated.
7. Volume Settings
a. Custom Maximum Volume: Allows you to set a maximum volume limit. Once configured, the system volume cannot exceed the specified level.
b. Custom Power-On Volume: Allows you to set the default volume level when the DT11 is powered on.
Note: The Custom Maximum Volume setting takes priority over the Custom Power-On Volume setting.
Priority: Custom Maximum Volume > Custom Power-On Volume.
8. Scheduled Power Off
Sleep Timer:
You can set a sleep timer so that the DT11 automatically powers off when the specified time is reached.
The sleep timer can be set to any integer value between 0 and 120 minutes.
Setting it to OFF disables the Sleep Timer function.
Idle Power-Off Timer:
When the DT11 is not being operated and no music is playing, the device will automatically power off once the specified idle time is reached.
If any operation or playback occurs during the countdown, the timer will reset and start counting again.
The idle power-off timer can be set from 0 to 24 hours.
Setting it OFF disables the Idle Power-Off function.
9. Screen Rotation
When Screen Rotation is enabled, you can rotate the display interface by 90°, 180°, or 270° to suit your preferred viewing orientation.
10. Cassette Mode
You can enter Cassette Mode by switching to the landscape cassette interface or by tapping the Cassette Mode app from the drop-down menu or system home screen.
How to Exit Cassette Mode:
Tap the screen in Cassette Mode to display the Exit button in the upper-left corner, then tap it to exit.
Alternatively, you can swipe up from the bottom of the screen or swipe left or right from the edge of the display to exit.
Changing Cassette Themes:
Tap the icon in the upper-right corner to browse and switch between different cassette themes.
11. Navigation Settings
The DT11 supports three system navigation methods:
-
Gesture Navigation
-
Two-Button Navigation
-
Three-Button Navigation
You can select your preferred navigation method according to your usage habits.