5. How to Update the Firmware on the DT11
The DT11 supports two firmware update methods: Online Update and Local Update.
1. Online Update
Connect the DT11 to Wi-Fi. If a new firmware version is available, an update notification will appear in the notification bar. Tap the notification to enter the firmware update page.
Alternatively, go to Technical Support > Firmware Update > Online Update, and tap Check for Updates to manually check whether a new firmware version is available.
2. Local Update
Download the latest firmware package from the official FIIO website and copy it to the DT11's internal storage or microSD (TF) card.
Then go to Technical Support > Firmware Update > Local Update, locate the downloaded firmware package, and tap it to start the update.
Notes:
-
There is no need to extract the firmware package before updating.
-
Make sure the DT11 has sufficient battery power (above 30%) before starting the update to prevent update failures.
-
If the device enters Recovery Mode during the update and cannot detect the firmware package, the package may be corrupted. Press the Power button to confirm, select Reboot to restart the device, then download the firmware again, copy it to the DT11, and retry the update.
Possible Issues During Firmware Updates and Their Solutions
The firmware update process usually takes approximately 5–20 minutes. After the update, the system will automatically restart, which may take approximately 2 minutes. Please allow the process to complete.
-
The DT11 freezes or fails to boot after a firmware update.
Try performing a force restart by pressing and holding the Power button for approximately 10 seconds until the "FIIO" logo appears on the screen.
-
An "Invalid Image" error appears during an online update.
Go to the following directory in the internal storage:
Android/data/com.android.fiioupdate/files
Delete the relevant update files or folder, then try the online update again.
-
The online or local firmware update fails.
If the online update fails, try performing a local update instead.
If the local update fails, the firmware package may have been corrupted during downloading or copying. Download the firmware package again, copy it to the DT11, and retry the local update.
-
The device enters Recovery Mode and cannot detect the firmware package.
The firmware package may be corrupted.
Press the Power button to confirm, select Reboot to restart the DT11, then download the firmware package again, copy it to the device, and retry the update.
-
A system error occurs and the DT11 cannot operate normally.
You can try entering Recovery Mode to restart the device:
-
Power off the DT11.
-
Press and hold the Play/Pause button.
-
While holding the button, connect a USB cable to supply power.
-
The DT11 will boot into Recovery Mode.
-
Select Reboot system now to restart the device.
5. How to Install Third-Party Apps on the DT11
There are two ways to install third-party apps on the DT11, similar to installing apps on a smartphone.
Method 1: Install Apps from an App Store
Connect the DT11 to Wi-Fi, then open FIIO Market, Google Play, or another app store to search for, download, and install the desired apps directly.
Method 2: Install Apps Locally via APK Files
Download the desired APK installation file on your computer and copy it to the DT11.
Then open File Manager on the DT11, locate the APK file, and tap it to install the app.